SMS Software Manual
First, the software running 2
Two, Software Configuration 3
Third, the use of software 4
3.1 business management 4
3.1.1 the type of contact management 4
3.1.2 contact information management 5
3.1.3 Mobile and replication node 7
3.2 instant message 8
3.2.1 send instant message 8
3.2.2 Send database file 9
3.2.3 Send ODBC data 11
3.3 Timing message 13
3.4 cycle of message 15
3.5 off a list of 16
3.6 message Record 17
3.7 Useful Phrases 19
3.8 Number Inquiry 19
3.9 Exit software 20
First, the software running
Installed "SMS Soft" software, the computer desktop and procedures on the menu can be found within the " etesnSMS " shortcut icon, click on the " etesnSMS " to start the software.
Start the software, select the type of device message (such as left):
Choose the type of device after the message, enter the software home, if there is no dongle is correctly installed, it will prompt "dongle not found the software" (such as right).
If you have the correct installation of the dongle, there will be no tips here.
Second, software configuration
Click on the "software configuration" button, enter the modify software configuration page:
Click the "Add / Remove" button, add, or delete operator, modify password operation;
Click "Change" button, can change the system administrator password;
Can choose whether to receive pop-up message box prompts; minimize whether to enter the required password authentication;
Can be set to send the send speed and serial number range (such as COM1 settings mobile hair, and the remaining hair Unicom).
Third, the use of software
3.1 business management
3.1.1 the type of contact management
Entered a "business card management" page, click on the "business card folder using the prompt," appears as shown in the use of prompts:
Business management as a tree list, select a one of a (ie a node), point right to the following pop-up menu shown in the figure below:
Click the "Add Sub-group", can be added to the contact type of the node, as shown below:
Select a node, select "Rename Packet" can be renamed the node (the root directory can not rename);
At the same time, select "delete packet" may be under the contact type and delete all contact information (the root directory can not be deleted).
Contact information management 3.1.2
Select a node, click the "Add", you can type in the contact to add contact information, the following chart:
Click "edit" to modify the selected contact information;
Click on "delete" to delete the selected contact information.
Click "edit list" button to modify the contact information of the subkey name, more in line with your requirement. The following diagram:
Click "Export business card", could be in the list of contact information to export saved as Excel files, as follows:
Click "Import business cards" can be information contact information from Excel file into the specified list:
Note: The imported Excel file should be a standard format. First one the best "Export business card" of the document as a template, and then write your contact information to ensure that you comply with the Excel file to import requirements.
3.1.3 Mobile node replication
Mouse to select a business card folder tree node, press the left mouse button and drag the node to another, you can realize the location of mobile nodes. As shown below, select the node "Ð¡ºú", press the left mouse button to drag their "friends / important", the completion of the mobile node:
Note: At the same time drag by pressing "Ctrl" key to achieve the node copy and paste.
3.2 instant message
3.2.1 to send an instant message
Click the "Add recipient" button, add the sent number (below):
Receiver number can be entered manually can import text (Note Send text document number to enter for acts Ending signs, permit number, both have spaces), but also from a business card folder to import.
"Delete the recipient", you can delete the list to receive the selected number;
"Clear the recipient", you can empty the current list of all the receiving numbers.
Can be hand-written message can also insert the phrase, as follows:
Check the "Auto-add the recipient to call", it will automatically add the recipient address (only communications were recorded into the receiver number);
Check the "return receipt request to receive", can be added to receive acknowledgment that the recipient has received the message;
Check the "urgent message" message can be submitted to the list Send the forefront, giving priority to send the information.
3.2.2 Send database file
Can send the spreadsheet file (*. xls), Text File (*. txt), CSV files (*. csv), Access data files (*. mdb), DBF data files (*. dbf), ParoDox files (*. db) and so on. To send Excel files as an example, the following chart:
Enter into the field at a table in the source file name, as follows:
Click OK, select the cell phone numbers and where the message content field, click OK to submit to send message.
Determined to send after the message will be sent immediately to the list.
3.2.3 Send ODBC data
Click the "Send ODBC data", select the external data source, as follows:
Choose Import field at a table in the source file name, the following chart:
Choose cell phone numbers and where the message content field, the following chart:
Click OK, the message will be immediately submitted to the waiting list.
3.3 Timing message
Entered a "regular message" page can be added from time to time message:
Set the "Send Date" "send time", that is, to the specified time, the software automatically starts to send mission;
"Add to receive number", to be used in manual input, text import, business card folder into ways to add numbers to receive;
"Delete reception number", you can delete the list to receive the selected number.
Message content can be entered manually, but also can click "insert the phrase", insert commonly used phrases.
Check the "Auto-add the recipient to call" can automatically add the recipient address (only communications were recorded into the receiver number).
At the list from time to time, you can view the current has been submitted to the timing of the outgoing message. Click "edit" button, the list may be amended from time to time the selected message, as follows:
"Delete", you can delete the list of the selected message from time to time;
"Clear List", you can empty the list of all of the message from time to time.
3.4 cycle message
Click the "Add the cycle message", the following chart:
Set "cycle", cycle for the "annual", "month", "weekly", "daily";
Set the "Send Time", that is, to activate the sending of the mission time;
"Subject message", message notes circulating information, not the content of message sent, mainly to facilitate inspection;
Message number to receive the "Add" button to add a receiver number, can be entered manually, text import, import business card folder;
Number to receive message "delete" button to delete the list to receive the selected number;
Message content "Add" button to add the message content, each cycle of a cycle, send the corresponding message content;
Message content of the "Edit" button to modify the current list of the contents of the selected message;
Message content "delete" button to delete the current list of the contents of the selected message;
Click "OK" button is about to set up well to the message list of the cycle, as shown below.
As shown below, click "edit message circle" to modify the cycle selected message;
Click on the "delete message circle" to delete the selected message cycle.
3.5 off list
Entered the "waiting list" page, to view all at the ready status of the message:
"Cancel Send" can be lifted off the list of the selected message;
"Priority to send" can be selected off the list of message in the forefront of the list, giving priority to send the message;
"Clear List" to empty the current list of all outgoing message;
"Permit to send status", as shown, that the list of outgoing message can be sent to normal. Click the button to switch status will be sent to "suspend the sending status," said the suspended list ready to send message.
3.6 Record message
Entered a "record message" page can be real-time view Record message. Choose "message type" (contains all the message, send the message successfully, receiving the message, sending a failure message), and "Sort" (contains the name, time, phone number), you can view the message in line with the conditions of Record.
Click on "Record Search", enter the following page:
As shown, enter the query, click "Search", you can query message according to the specified conditions of Record. Search results as follows:
In addition, the "forward message" can be easily selected to the list of message forward, receiving numbers can be entered manually, text import, import business card folder;
"Reply message" can be easily selected on the list of reply message;
"Message resend" can easily be the list of selected re-submit to send message;
"History" can easily see the list of message numbers selected records;
"Record to delete" to delete the list of the selected message record;
"Clear Record" to empty the current list of all the message records;
"Export the selected Record" message can be selected as a text file Export Record preservation;
"Export to Excel" could be the current list of all the message Record Export Excel file is saved.
3.7 Useful Phrases
Phrases used to enter the page, as follows:
Click the "+ +" button, a new type of commonly used phrases;
Click "-" button used to delete the selected message type;
Click the "Add" button, add the current message type in the phrase commonly used content;
Click "edit" button, modify the current selected list of commonly used message content;
Click on "delete" button, delete the current selected list of commonly used message content.
3.8 Number Inquiry
Entered the "Number Search" page as shown below
As shown, enter the mobile number before the 7 or long-distance area code, you can query the number of attribution to information;
As shown, in accordance with prescribed conditions can also search an area above the cell phone number information, in line with the conditions of paragraph number information will be displayed in the list.
3.9 Exit software
Click "Exit" button in the prompt message box appears click "OK" to exit the software, click the "Cancel" the abolition of exit.